1. The nozzle end of the equal diameter tee is the same size. 2. The size of the main pipe of the reduced tee is the same, and the size of the branch pipe is smaller than the size of the main pipe.Shandong Zhongao Steel Co. LTD. is a large-scale iron and steel enterprise integrating sintering, iron making, steel making, rolling, pickling, coating and plating, tube making, power generation, oxygen production, cement and port. The main products include sheet (hot rolled coil, cold formed coil, open and longitudinal cut sizing board, pickling board, galvanized sheet), section steel, bar, wire, welded pipe, etc. The by-products include cement, steel slag powder, water slag powder, etc. Among them, fine plate accounted for more than 70% of the total steel production.The three-way has three openings, namely one inlet, two outlet; Or a chemical pipe fitting with two inlet and one outlet, with T shape and Y shape, with equal diameter pipe mouth, and also with different diameter pipe mouth, used for three same or different pipe convergence. The main function of the tee is to change the direction of the fluid. Tee also known as pipe fittings tee or tee pipe fittings, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch. It can be classified by pipe size. Generally made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, pvc and other materials.1. 2 layer PE foil protection; 2. After binding and making, cover with polyethylene waterproof cloth; 3. Thick wood covering; 4. LCL metal pallet to avoid damage, wooden pallet full load; 5. According to customer requirements.